Fasteners Suppliers and Dealers in Kuwait - Rebolt Alloys
Rebolt Alloys is a globally approved ASTM A194 GR.8 Fasteners Supplier in Kuwait. Fasteners are manufactured under strict quality standards to ensure that they meet the highest levels of performance. We are rewarded as leading Fasteners Supplier in Kuwait. With our commitment to customer satisfaction and timely delivery, we have been able to build a strong reputation for Fasteners Dealers in Kuwait.
304 Fasteners Supplier, Duplex Fasteners Supplier, Stainless Steel Fasteners Exporter, SS Fasteners Supplier in Kuwait
As a ASTM A193 B8C Bolt Fasteners Supplier and Stockist in Kuwait, we are committed to providing our customers with the highest quality products at competitive prices. We manufacture these Fasteners in a variety of dimensions, grades and types like Hex Nut, Hex Bolt, Grub Screw, Plain Washer, Rivets, Studs and Threaded Rods.
Our expertise in handling custom orders positions us among the most trusted suppliers of Fasteners, allowing us to complete orders of various shapes and sizes while ensuring the highest level of client satisfaction. We are also the largest Nut Supplier in Kuwait.
Specifications of Fasteners
Standard Fasteners specifications as per fasteners manufacturers.
| Standard of Fasteners | DIN, ASTM, BS and all International Standards |
| Fasteners Length | 3 mm to 200 mm |
| Nuts Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Bolt / Screw Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Machine Screws Size | M1.6 - M12 |
| Washers Size | M3 - M56 | 3/6" to 2" | Custom Sizes |
| Fasteners Type | Hexagon Nut, Nut, Hex Coupling Nut, Hex Nut, Square Nut, Hex Domed Cap Nuts, Hex Head Bolts, Stud Bolts, Bolts, Nuts, Sockets, Screws, Screw, Studs, Socket Screw, Mushroom Head Square Neck Bolts, J Bolts, Hex Set Screw, Cap Screw, Machine Screw, Pan Head Screw, Allen Cap screw, Socket Head Cap Screw, Wing Screw, Spring Washers, Washers, Studs, Marine Anchors, Anchors, Socket Hexagon Head Screw,U- Bolts, Anchor Bolt, Wing Screw, T-Head Bolts, Foundation Bolts, Eye Bolt,Structural Bolts. |
| Packing of Fasteners | Wooden pallet, Small Boxs / Carton / Pallet, or as customer request |
| Finish on Fasteners | HDG, Zinc Plated, Zinc Flake, Black Oxide, Xylan or as customer request |
| Grades | |
| Stainless Steel | ASTM / ASME SA 312 GR. TP 304 , 304L , 304H, 309S ,309H , 310S, 310H , 316 , 316TI , 316H. |
| Duplex Steel | UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760. |
| Nickel Alloys | Nickel Alloys 200, Nickel Alloys 201 |
| Hastelloy | Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000, Hastelloy C-4, Hastelloy X, Hastelloy B, Hastelloy N, Hastelloy G |
Types of Fasteners
Each Fasteners have unique design each of them are used in specific applications. Some of them are mentioned below.
Nut
- Hex Nuts
- Heavy Hex Nut
- Square Nut
- Dome Nut
- Nylock Nut
- Wing Nut
- Lock Nut
- Cage Nut
- Coupling Nut
- Cap Nut
- Cross Hole Nut
- Castle Nut
- Slotted Round Nut
Washers
- Belleville Washers
- Bonded Sealing Washers
- Flat Washers
- Lock Washers
- Spring Washers
- Star Washers
- Square Washer
- Plain Washers
- Countersunk Washer
| Products | Size | Property Class | Standard |
| Socket Head Cap Screw | M3 to M30 | A2 – 70/80, A4 – 70/80 | DIN 912 / ISO 4762 |
| Hex Head Screw (Full Thread) | M3 to M30 | A2 – 70/80, A4 – 70/80 | DIN 933 / ISO 4017 |
| Hex Head Bolt (Partial Thread) | M3 to M30 | A2 – 70/80, A4 – 70/80 | DIN 931 / ISO 4014 |
| Hex Nut | M3 to M30 | A2 – 70/80, A4 – 70/80 | DIN 934 / ISO 4032 |
| Plain Washer | M3 to M64 | A2, A4 | DIN 125 A |
| Flat – Section Spring Washer | M3 to M64 | A2, A4 | DIN 127 B |
| Square – Section Spring Washer | M3 to M64 | A2, A4 | DIN 7980 |
| Threaded Rod | M3 to M64 | A2 – 70/80, A4 – 70/80 | DIN 975 |
Bolt Dimension Chart
Note that this chart includes only some of the most common sizes of bolts. There are many other sizes available as well, and some applications may require custom sizes or special configurations.
|
Nominal Size |
Bolt Diameter ‘D’ | Across Flats ‘A’ | Across Corners ‘B’ | Head Height ‘C’ | Thread Length ‘L’ | Transition Length ‘Y’ | |||||||
| Max (in) | Min (in) | Nominal (in) | Max (in) | Min (in) | Max (in) | Min (in) | Nominal (in) | Max (in) | Min (in) | ≤6 in | >6 in |
Max (in) |
|
|
1/4 |
0.25 | 0.245 | 7/16 | 0.438 | 0.428 | 0.505 | 0.488 | 5/32 | 0.163 | 0.15 | 0.75 | 1 | 0.25 |
| 5/16 | 0.3125 | 0.3065 | 1/2 | 0.5 | 0.489 | 0.577 | 0.557 | 13/64 | 0.211 | 0.195 | 0.875 | 1.125 |
0.278 |
|
3/8 |
0.375 | 0.369 | 9/16 | 0.562 | 0.551 | 0.65 | 0.628 | 15/64 | 0.243 | 0.226 | 1 | 1.25 | 0.312 |
| 7/16 | 0.4375 | 0.4305 | 5/8 | 0.625 | 0.612 | 0.722 | 0.698 | 9/32 | 0.291 | 0.272 | 1.125 | 1.375 |
0.357 |
|
1/2 |
0.5 | 0.493 | 3/4 | 0.75 | 0.736 | 0.866 | 0.84 | 5/16 | 0.323 | 0.302 | 1.25 | 1.5 | 0.385 |
| 9/16 | 0.5625 | 0.5545 | 13/16 | 0.812 | 0.798 | 0.938 | 0.91 | 23/64 | 0.371 | 0.348 | 1.375 | 1.625 |
0.417 |
|
5/8 |
0.625 | 0.617 | 15/16 | 0.938 | 0.922 | 1.083 | 1.051 | 25/64 | 0.403 | 0.378 | 1.5 | 1.75 | 0.455 |
| 3/4 | 0.75 | 0.741 | 1-1/8 | 1.125 | 1.1 | 1.299 | 1.254 | 15/32 | 0.483 | 0.455 | 1.75 | 2 |
0.5 |
|
7/8 |
0.875 | 0.866 | 1-5/16 | 1.312 | 1.285 | 1.516 | 1.465 | 35/64 | 0.563 | 0.531 | 2 | 2.25 | 0.556 |
| 1 | 1 | 0.99 | 1-1/2 | 1.5 | 1.469 | 1.732 | 1.675 | 39/64 | 0.627 | 0.591 | 2.25 | 2.5 |
0.625 |
|
1-1/8 |
1.125 | 1.114 | 1-11/16 | 1.688 | 1.631 | 1.949 | 1.859 | 11/16 | 0.718 | 0.658 | 2.5 | 2.75 | 0.714 |
| 1-1/4 | 1.25 | 1.239 | 1-7/8 | 1.875 | 1.812 | 2.165 | 2.066 | 25/32 | 0.813 | 0.749 | 2.75 | 3 |
0.714 |
|
1-3/8 |
1.375 | 1.363 | 2-1/16 | 2.062 | 1.994 | 2.382 | 2.273 | 27/32 | 0.878 | 0.81 | 3 | 3.25 | 0.833 |
| 1-1/2 | 1.5 | 1.488 | 2-1/4 | 2.25 | 2.175 | 2.598 | 2.48 | 1-5/16 | 0.974 | 0.902 | 3.25 | 3.5 |
0.833 |
|
1-3/4 |
1.75 | 1.738 | 2-5/8 | 2.625 | 2.538 | 3.031 | 2.89 | 1-3/32 | 1.134 | 1.054 | 3.75 | 4 | 1 |
| 2 | 2 | 1.988 | 3 | 3 | 2.9 | 3.464 | 3.306 | 1-7/32 | 1.263 | 1.175 | 4.25 | 4.5 |
1.111 |
|
2-1/4 |
2.25 | 2.238 | 3-3/8 | 3.375 | 3.262 | 3.897 | 3.719 | 1-3/8 | 1.423 | 1.327 | 4.75 | 5 | 1.111 |
| 2-1/2 | 2.5 | 2.488 | 3-3/4 | 3.75 | 3.625 | 4.33 | 4.133 | 1-17/32 | 1.583 | 1.479 | 5.25 | 5.5 |
1.25 |
|
2-3/4 |
2.75 | 2.738 | 4-1/8 | 4.125 | 3.988 | 4.763 | 4.546 | 1-11/16 | 1.744 | 1.632 | 5.75 | 6 | 1.25 |
| 3 | 3 | 2.988 | 4-1/2 | 4.5 | 4.35 | 5.196 | 4.959 | 1-7/8 | 1.935 | 1.815 | 6.25 | 6.5 |
1.25 |
Hex Nut Dimensions Chart
Note that this chart includes only some of the most common sizes of nuts. There are many other sizes available as well, and some applications may require custom sizes or special configurations.
| Size | Nominal (Major) Diameter [in] |
Width Across Flats | Thickness | ||
| Nominal [in] | Minimum [in] | Minimum [in] | Maximum [in] | ||
| #0 | 0.060 | 5/32"(0.156) | 0.150 | 0.043 | 0.050 |
| #2 | 0.086 | 3/16"(0.188) | 0.180 | 0.057 | 0.066 |
| #4 | 0.112 | 1/4"(0.250) | 0.241 | 0.087 | 0.098 |
| #6 | 0.138 | 5/16"(0.312) | 0.302 | 0.102 | 0.114 |
| #8 | 0.164 | 11/32"(0.344) | 0.332 | 0.117 | 0.130 |
| #10 | 0.190 | 3/8"(0.375) | 0.362 | 0.117 | 0.130 |
| 1/4" | 0.250 | 7/16"(0.438) | 0.423 | 0.178 | 0.193 |
| 5/16" | 0.312 | 9/16"(0.562) | 0.545 | 0.208 | 0.225 |
| 3/8" | 0.375 | 5/8"(0.625) | 0.607 | 0.239 | 0.257 |
Flat Washer Dimensions Chart
| Nominal Size | Series | Inner Diameter | Outer Diameter | Thickness | |||
| Min [mm] | Max [mm] | Min [mm] | Max [mm] | Min [mm] | Max [mm] | ||
| M1.6 | Narrow | 1.95 | 2.09 | 3.70 | 4.00 | 0.50 | 0.70 |
| M1.6 | Regular | 1.95 | 2.09 | 4.70 | 5.00 | 0.50 | 0.70 |
| M1.6 | Wide | 1.95 | 2.09 | 5.70 | 6.00 | 0.60 | 0.90 |
| M2 | Narrow | 2.50 | 2.64 | 4.70 | 5.00 | 0.60 | 0.90 |
| M2 | Regular | 2.50 | 2.64 | 5.70 | 6.00 | 0.60 | 0.90 |
| M2 | Wide | 2.50 | 2.64 | 7.64 | 8.00 | 0.60 | 0.90 |
| M2.5 | Narrow | 3.00 | 3.14 | 5.70 | 6.00 | 0.60 | 0.90 |
| M2.5 | Regular | 3.00 | 3.14 | 7.64 | 8.00 | 0.60 | 0.90 |
| M2.5 | Wide | 3.00 | 3.14 | 9.64 | 10.00 | 0.80 | 1.20 |
| M3 | Narrow | 3.50 | 3.68 | 6.64 | 7.00 | 0.60 | 0.90 |
| M3 | Regular | 3.50 | 3.68 | 9.64 | 10.00 | 0.80 | 1.20 |
| M3 | Wide | 3.50 | 3.68 | 11.57 | 12.00 | 1.00 | 1.40 |
| M3.5 | Narrow | 4.00 | 4.18 | 8.64 | 9.00 | 0.80 | 1.20 |
| M3.5 | Regular | 4.00 | 4.18 | 9.64 | 10.00 | 1.00 | 1.40 |
| M3.5 | Wide | 4.00 | 4.18 | 14.57 | 15.00 | 1.20 | 1.75 |
| M4 | Narrow | 4.70 | 4.88 | 9.64 | 10.00 | 0.80 | 1.20 |
| M4 | Regular | 4.70 | 4.88 | 11.57 | 12.00 | 1.00 | 1.40 |
| M4 | Wide | 4.70 | 4.88 | 15.57 | 16.00 | 1.60 | 2.30 |
| M5 | Narrow | 5.60 | 5.78 | 10.57 | 11.00 | 1.00 | 1.40 |
| M5 | Regular | 5.60 | 5.78 | 14.57 | 15.00 | 1.20 | 1.75 |
| M5 | Wide | 5.60 | 5.78 | 19.48 | 20.00 | 1.60 | 2.30 |
| M6 | Narrow | 6.65 | 6.87 | 12.57 | 13.00 | 1.20 | 1.75 |
| M6 | Regular | 6.65 | 6.87 | 18.28 | 18.80 | 1.20 | 1.75 |
| M6 | Wide | 6.65 | 6.87 | 24.88 | 25.40 | 1.60 | 2.30 |
| M8 | Narrow | 8.90 | 9.12 | 18.28 | 18.80 | 1.60 | 2.30 |
| M8 | Regular | 8.90 | 9.12 | 24.88 | 25.40 | 1.60 | 2.30 |
| M8 | Wide | 8.90 | 9.12 | 31.38 | 32.00 | 2.00 | 2.80 |
| M10 | Narrow | 10.85 | 11.12 | 19.48 | 20.00 | 1.60 | 2.30 |
| M10 | Regular | 10.85 | 11.12 | 27.48 | 28.00 | 2.00 | 2.80 |
| M10 | Wide | 10.85 | 11.12 | 38.38 | 39.00 | 2.50 | 3.50 |
| M12 | Narrow | 13.30 | 13.57 | 24.88 | 25.40 | 2.00 | 2.80 |
| M12 | Regular | 13.30 | 13.57 | 33.38 | 34.00 | 2.50 | 3.50 |
| M12 | Wide | 13.30 | 13.57 | 43.38 | 44.00 | 2.50 | 3.50 |
| M14 | Narrow | 15.25 | 15.52 | 27.48 | 28.00 | 2.00 | 2.80 |
| M14 | Regular | 15.25 | 15.52 | 38.38 | 39.00 | 2.50 | 3.50 |
| M14 | Wide | 15.25 | 15.52 | 49.38 | 50.00 | 3.00 | 4.00 |
| M16 | Narrow | 17.25 | 17.52 | 31.38 | 32.00 | 2.50 | 3.50 |
| M16 | Regular | 17.25 | 17.52 | 43.38 | 44.00 | 3.00 | 4.00 |
| M16 | Wide | 17.25 | 17.68 | 54.80 | 56.00 | 3.50 | 4.60 |
| M20 | Narrow | 21.80 | 22.13 | 38.38 | 39.00 | 3.00 | 4.00 |
| M20 | Regular | 21.80 | 22.32 | 49.00 | 50.00 | 3.50 | 4.60 |
| M20 | Wide | 21.80 | 22.32 | 64.80 | 66.00 | 4.00 | 5.10 |
| M24 | Narrow | 25.60 | 26.12 | 43.00 | 44.00 | 3.50 | 4.60 |
| M24 | Regular | 25.60 | 26.12 | 54.80 | 56.00 | 4.00 | 5.10 |
| M24 | Wide | 25.60 | 26.12 | 70.80 | 72.00 | 4.50 | 5.60 |
| M30 | Narrow | 32.40 | 33.02 | 54.80 | 56.00 | 4.00 | 5.10 |
| M30 | Regular | 32.40 | 33.02 | 70.80 | 72.00 | 4.50 | 5.60 |
| M30 | Wide | 32.40 | 33.02 | 88.60 | 90.00 | 5.00 | 6.40 |
| M36 | Narrow | 38.30 | 38.92 | 64.80 | 66.00 | 4.50 | 5.60 |
| M36 | Regular | 38.30 | 38.92 | 88.60 | 90.00 | 5.00 | 6.40 |
| M36 | Wide | 38.30 | 38.92 | 108.60 | 110.00 | 7.00 | 8.50 |
Applications Of Fasteners
- Oil & Gas Industry
- Power Plant
- Marine & Ship Building Industry
- Refining Industry
- Automotive Industry
- Pharmacutical Industry
- Engineering Sector
- Engine & Turbines
- Aerospace Industry
- Construction Industry
Fasteners Supplier and Exporter in Kuwait
Rebolt Alloys
Fasteners Supplier in Kuwait
We supply Fasteners in different cities like Riyadh, Sakaka, Jubail, Jeddah, Dhahran, & Abqaiq. We are happy to quote you SS Fasteners at best price. Each month we supply large amount of Fasteners to different cities in Kuwait. The complete lists of locations we supply Fasteners are mentioned in below table.
| Saudi City we Supply Fasteners | |||||
| Kuwait City | Faiha | Shuwaikh | Ahmadi | Jahra | Mina Abdullah Industrial Area |
| Al Rai | Ardiya | Al Wafrah | Mishrif | Doha | Al-Farwaniyah |
Fasteners Supplier & Exporter in Kuwait
Rebolt Alloys state itself as emerging and leading Fastener Supplier in Kuwait, UAE, Malaysia, USA, Africa and other countries world wide. Our mainly focus on Exporting Fasteners world wide anywhere in the world, we established ourself as leading Fasteners Exporter in Kuwait. We export numbers of Custom Fasteners containers each month to Kuwait ports.
| Countries We Export Fasteners | |||
| Oman | Qatar | Kuwait | Germany |
| Mexico | Canada | Saudi Arabia | United Kingdom |
| United States | South Africa | Malaysia | UAE |
| Singapore | Sri Lanka | Australia | Brazil |
| France | Italy | Greece | Nepal |
Shipping Policy of Fasteners
Rebolt Alloys has a comprehensive shipping policy in place in order to ensure that customers get their SS Fasteners as soon as possible. The company makes every effort to complete orders as quickly as possible since it recognises how important timely Fasteners delivery is to the success of our customers' projects.
In cases an item is out of stock or back-ordered, Rebolt Alloys will notify the customer and provide an estimated delivery date. Rebolt Alloys ensures that all orders are well-packaged to prevent damage during transit. In cases where an item is received damaged, customers can contact the company's customer support team for assistance.
Contact Details
-
For Enquiry -
Send Us Email